The LowPro 15/05 Road Plate is a modular system of linking units, suitable for use over an 18” wide trench (depending on the local DOT requirements). Each section weighs 97lbs, making the LowPro 15/05 Road Plate far lighter and easier to handle than a steel trench plate. Using a team of 2 workers, rather than expensive heavy lifting equipment, the Road Plate can be carried and installed in minutes.
Underneath the composite Road Plate are 2 sets of lateral locks: these locks drop into place when the Road Plate is installed over a trench. The locks sit within the trench on either side to prevent lateral movement.
The anti-slide technology, on the underside and edges of the Road Plate, is made from a soft, flexible, rubber material which grips the surface to reduce unwanted movement.
The Road Plate is currently used in residential areas, on roadways and utility sites partially because of its noise dampening edges. The patented Flexi-Edge reduces noise by absorbing sound; the rubber-edges are far softer than steel thus eliminating that harsh, loud clang when traffic drives over the top.
Reduce install time again when using the road plate: with its pinholes, drop pins, and Flexi-Edges there is no longer a need for cold patch. Rubber edges can also be replaced to extend the life of your LowPro 15/05 Road Plate.
The anti-skid surface provides secure access, and hi-vis yellow alerts drivers to reduce their speed.
|Type||Inner Piece||End Piece|
|Length, end-to-end||59 in||59 in|
|Width||19.7 in||19.7 in|
|Weight||92 lbs||51 lbs|
|Number / pallet||20||20|
|Color||Yellow and black||Yellow|